JVC KD-SH707R Sound Adjustments, Adjusting the sound, To adjust the input level of each source

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your preference.

1 Select the item you want to adjust.

Each time you press the button,

the adjustable items change as follows:

FADER*	BAL	EX BASS**
(Fader)	(Balance)	(Extended Bass)

2 Adjust the level.

To increase the level.

To decrease the level.

Note:

Normally, the control dial works as the volume control. So you do not have to select “VOLUME” to adjust the volume level.

ENGLISH

VOLUME		VOL ADJ****		WOOFER***
	(Volume Adjustment)			(Subwoofer)
Indication		To do:		Range
FADER*	Adjust the front		R06 (Rear only)
	and rear speaker
	balance.		F06 (Front only)
BAL	Adjust the left		L06 (Left only)
	and right speaker
	balance.		R06 (Right only)
EX BASS**	Turn on or off the		ON
	Extended Bass.
			OFF
WOOFER***	Adjust the		00 (min.)
	subwoofer output
	level.		12 (max.)
VOL ADJ****	See “To adjust		–12 (min.)
	the input level of
	each source” on		+12 (max.)
	the right column.
VOLUME	Adjust the volume.		00 (min.)
			50 (max.)

To adjust the input level of each source

You can adjust the input level of each source except FM, and store it in memory.

By adjusting the input level properly to match it to the FM sound level, you will not need to adjust the volume level each time you change the source.

*If you are using a two-speaker system, set the fader level to “00.”

**The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume – Extended Bass.

***This takes effect only when a subwoofer is connected.

****Not adjustable when the source is FM. “FIX” will appear.

33