Wireless Access Point User Guide
SNMP
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program on your PC. To reach this screen, select SNMP in the Management section of the menu.
Figure 54: SNMP Screen
Data - SNMP Screen
General
Enable SNMP | Use this to enable or disable SNMP as required |
|
|
Community | Enter the community string, usually either "Public" or "Private". |
|
|
Access Rights | Select the desired option: |
| • |
| • Read/Write - Data can be read, and setting changed. |
|
|
Managers |
|
Any Station | The IP address of the manager station is not checked. |
|
|
Only this station | The IP address is checked, and must match the address you enter in |
| the IP address field provided. |
| If selected, you must enter the IP address of the required station. |
|
|
Traps |
|
Disable | Traps are not used. |
|
|
Broadcast | Select this to have Traps broadcast on your network. This makes |
| them available to any PC. |
|
|
Send to | Select this to have Trap messages sent to the specified PC only. If |
| selected, you must enter the IP Address of the desired PC. |
|
|
Trap version | Select the desired option, as supported by your SNMP Management |
| program. |
|
|
64
