Lenovo 4215, 4220, 4222 Diagnostic error codes, Diagnostic Error Code FRU/Action, XXX Bios Timeout

Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See “Running tests” on page 35 for the specific type for information about the diagnostic programs.

In the following index, X can represent any number.

Diagnostic Error Code	FRU/Action
000-000-XXXBIOS Test Passed	No action
000-002-XXX BIOS Timeout	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-024-XXXBIOS Addressing test failure	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-025-XXXBIOS Checksum Value error	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-026-XXXFLASH data error	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-027-XXXBIOS Configuration/Setup error	1. Run the Setup Utility program.
	2.	Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	3.	System board
000-034-XXXBIOS Buffer Allocation failure	1. Reboot the system.
	2.	Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	3.	Run memory test
	4.	System board
000-035-XXXBIOS Reset Condition detected	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-036-XXXBIOS Register error	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-038-XXXBIOS Extension failure	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	Adapter card
	3.	System board
000-039-XXXBIOS DMI data error	1. Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
000-195-XXXBIOS Test aborted by user	Information only Restart the test, if necessary
000-196-XXXBIOS test halt, error threshold exceeded	1. Press F3 to review the log file.
	2.	Restart the test to reset the log file.

46Hardware Maintenance Manual