Diagnostic Error Code | FRU/Action | |
|
|
|
1. | Make sure the component that is called out is | |
|
| connected and/or enabled. See Chapter 6 “Using |
|
| the Setup Utility program” on page 39. |
| 2. | |
| 3. | Replace the component that is called out in warning |
|
| statement |
| 4. | Replace the component under test. |
|
|
|
1. | Make sure the component that is called out is | |
|
| connected and/or enabled. See Chapter 6 “Using |
|
| the Setup Utility program” on page 39. |
| 2. | Flash the system and retest. See “Updating |
|
| (flashing) the BIOS” on page 165. |
| 3. | Go to “Undetermined problems” on page 67. |
|
|
|
1. | Go to “Undetermined problems” on page 67. | |
| 2. | Flash the system and |
| 3. | Replace component under function test. |
|
|
|
1. | Flash the system. See “Updating (flashing) the | |
|
| BIOS” on page 165. |
| 2. | System board |
|
|
|
1. | Flash the system. See “Updating (flashing) the | |
|
| BIOS” on page 165. |
| 2. | System board |
|
| |
No action | ||
|
| |
| System board | |
|
| |
| System board | |
|
| |
System board | ||
|
|
|
1. | Flash the system. See “Updating (flashing) the | |
|
| BIOS” on page 165. |
| 2. | System board |
|
|
|
1. | Flash the system. See “Updating (flashing) the | |
|
| BIOS” on page 165. |
| 2. | System board |
|
|
|
1. | Run the Setup Utility program. | |
| 2. | Flash the system. See “Updating (flashing) the |
|
| BIOS” on page 165. |
| 3. | System board |
|
| |
System board | ||
|
|
|
1. | Reboot the system. | |
| 2. | Flash the system. See “Updating (flashing) the |
|
| BIOS” on page 165. |
| 3. | Run memory test. |
| 4. | System board |
|
| |
System board | ||
|
| |
System board | ||
|
|
|
Chapter 8.