Lenovo 4221, 4220, 4222, 4215, 4219 Diagnostic Error Code, FRU/Action, XXX 001-255-XXX 001-256-XXX

Diagnostic Error Code	FRU/Action
001-038-XXXSystem Extension failure	1.	Adapter card
	2.	System board
001-039-XXXSystem DMI data structure error	1.	Flash the system. See “Updating (flashing) the
		BIOS” on page 165.
	2.	System board
001-040-XXXSystem IRQ failure	1.	Power-off/on system and re-test.
	2.	System board
001-041-XXXSystem DMA failure	1.	Power-off/on system and re-test.
	2.	System board
001-195-XXXSystem Test aborted by user	Information only Restart the test, if necessary
001-196-XXXSystem test halt, error threshold exceeded	1.	Press F3 to review the log file
	2.	Restart the test to reset the log file
001-197-XXXSystem test warning	1.	Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 39.
	2.	Re-run test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
001-198-XXXSystem test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 39.
	2.	Flash the system and retest. See “Updating
		(flashing) the BIOS” on page 165.
	3.	Go to “Undetermined problems” on page 67.
001-199-XXXSystem test failed, cause unknown	1.	Go to “Undetermined problems” on page 67.
	2.	Flash the system and re-test.
	3.	Replace component under function test.
001-250-XXXSystem ECC error	System board
001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX	System board
System DMA error
001-260-XXX 001-264-XXX System IRQ error	System board
001-268-XXXSystem IRQ1 failure	1.	Device on IRQ1
	2.	System board
001-269-XXXSystem IRQ2 failure	1.	Device on IRQ2
	2.	System board
001-270-XXXSystem IRQ3 failure	1.	Device on IRQ3
	2.	System board
001-271-XXXSystem IRQ4 failure	1.	Device on IRQ4
	2.	System board
001-272-XXXSystem IRQ5 failure	1.	Device on IRQ5
	2.	System board

48Hardware Maintenance Manual