Lenovo 4222, 4220, 4215, 4219, 4221 manual Diagnostic Error Code FRU/Action

Diagnostic Error Code	FRU/Action
005-016-XXXVideo Simple Pattern test failure	1. Video Ram
	2.	Video card, if installed
	3.	System board
005-024-XXXVideo Addressing test failure	1.	Video card, if installed
	2.	System board
005-025-XXXVideo Checksum Value error	1. Video card, if installed
	2.	System board
005-027-XXXVideo Configuration/Setup error	1. Run the Setup Utility program.
	2.	Video drivers update
	3.	Video card, if installed
	4.	System board
005-031-XXXVideo Device Cable failure	1. Video cable
	2.	Monitor
	3.	Video card, if installed
	4.	System board
005-032-XXXVideo Device Controller failure	1.	Video card, if installed
	2.	System board
005-036-XXXVideo Register error	1.	Video card, if installed
	2.	System board
005-038-XXXSystem BIOS extension failure	1. Video card, if installed
	2.	System board
005-040-XXXVideo IRQ failure	1.	Video card, if installed
	2.	System board
005-195-XXXVideo Test aborted by user	Information only Restart the test, if necessary
005-196-XXXVideo test halt, error threshold exceeded	1. Press F3 to review the log file.
	2.	Restart the test to reset the log file.
005-197-XXXVideo test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 39.
	2.	Re-run test
	3.	Replace the component called out in warning
		statement.
	4.	Replace the component under test.
005-198-XXXVideo test aborted	1. If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 39.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS” on page 165.
	3.	Go to “Undetermined problems” on page 67.
005-199-XXXVideo test failed, cause unknown	1. Go to “Undetermined problems” on page 67.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS” on page 165.
	3.	Replace component under function test.

50Hardware Maintenance Manual