Lenovo 4219, 4220, 4222, 4215, 4221 manual Removing a PCI card

Figure 9. Removing a PCI card

Note: The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot.

5.Remove the new PCI card from its static-protective package.

6.Install the new PCI card into the appropriate slot on the system board. See “Locating parts on the system board” on page 71.

Note: If you are installing a PCI Express x16 graphics card, make sure the memory slot retaining clips are closed before you install the graphics card.

7.Pivot the card latch to the closed position to secure the PCI card.

Chapter 9. Replacing FRUs 77