Printer control panel messages (continued)
Message | Description | Recommended action | ||
|
|
| ||
53.XY.ZZ ERROR | Indicates a memory error. If a DIMM | Clear the error by turning the | ||
BASE MEM BANK B | caused the error, the DIMM will not | printer off and then on. Verify | ||
or | be recognized. Values of X, Y, and Z | that the DIMM is correctly | ||
53.XY.ZZ ERROR | are as follows: | installed. If the DIMM is | ||
DIMM A BANK B |
|
| correctly installed, replace the | |
X | Memory Type | DIMM. See “Installing DIMMs” | ||
alternates with | ||||
0 | ROM | on page 217. If the problem | ||
PRESS GO TO | ||||
1 | RAM | persists, call HP Support. | ||
CONTINUE | ||||
|
|
| ||
alternates with | Y | Device Location |
| |
NO MORE ERRORS |
| |||
0 | On board |
| ||
CONTINUING |
| |||
1 | DIMM Slot 1 |
| ||
|
| |||
| 2 | DIMM Slot 2 |
| |
| 3 | DIMM Slot 3 |
| |
| ZZ | Error Number |
| |
| 0 | Unsupported memory |
| |
| 1 | Unrecognized memory |
| |
| 3 | Failed RAM test |
| |
|
|
| ||
54.X PRINTER | An error has occurred where X is | Clear the error by turning the | ||
ERROR | indicated below. | printer off and then on. If the | ||
|
|
| problem persists, call | |
| X | Description | HP Support. | |
| 1 | Internal power failure |
| |
| 2 | Carousel rotation failure |
| |
| 3 | Density sensor out of range |
| |
| 4 | Optional equipment not |
| |
|
| available |
| |
| 5 | Waste toner sensor |
| |
|
| malfunction |
| |
| 6 | OHT sensor malfunction |
| |
|
|
|
| |
166 Printer control panel messages | EN |
