Printer control panel messages (continued)
Message | Description | Recommended action |
|
|
|
READY | The printer is online and ready to | No action required. |
| receive data, and no status or |
|
| device attendance messages are |
|
| pending. |
|
|
|
|
REINSTALL | The transfer belt is broken or | Remove the transfer belt. |
TRANSFER BELT | incorrectly installed. | Inspect the transfer belt for |
|
| damaged areas and replace it if |
|
| necessary. |
|
| Check for broken connectors in |
|
| the middle front drawer. |
|
| Check for paper jammed inside |
|
| the connectors in the middle |
|
| front drawer. |
|
| Turn the white knobs on the |
|
| transfer belt until little windows |
|
| are visible. Tap the windows to |
|
| shake any toner loose. If the |
|
| toner does not shake loose, |
|
| reach under the window with a |
|
| |
|
| from the window. |
|
|
|
REMOVE PAPER JAM | Printer media has become jammed | Ensure that all jammed paper |
| somewhere in the paper path. | is removed from the paper |
|
| |
|
| |
|
|
|
REQUEST ACCEPTED | The printer is executing a request. | No action required. |
PLEASE WAIT | The printer returns to the READY |
|
| state upon completion of this |
|
| process. |
|
|
|
|
RESETTING | The printer is executing a memory | No action required. |
MEMORY | reset. The printer returns to the |
|
| READY state upon completion of this |
|
| process. |
|
|
|
|
RESETTING VALUES | The color calibration density values | No action required. |
FINISHED | have been reset to their default |
|
| values. |
|
|
|
|
RESTORING | The printer is executing a RESTORE | No action required. |
FACTORY SETTINGS | FACTORY SETTINGS or a COLD |
|
| RESET. |
|
|
|
|
160 Printer control panel messages | EN |