Printing from Tray 1 (multipurpose tray)
Tray 1, the multipurpose tray, can print on all supported sizes and types of media and envelopes. (See “Supported media weights and sizes” on page 67.)
1
2
3
Loading media into Tray 1
To load media into Tray 1
CAUTION
To avoid jams, never add or remove media from a tray during printing. To avoid damaging the printer, place labels and paper heavier than 105 g/m2 (28 lb up to 42 lb bond) only in Tray 1.
1Pull up the tray extension.
2 Slide the
3 Load media into the tray with the side to be printed facing the printer. Slide the media in until it sits squarely in the bottom of the tray.
78 Common printing tasks | EN |