Unable to select the printer from the computer
Cause | Solution |
|
|
If you are using a switch box, the printer may | Select the correct printer through your switch |
not be selected for your computer. | box. |
|
|
The printer’s READY indicator light is not lit. | Press GO to return the printer to the READY |
| state. |
|
|
The input tray specified is empty. | Load the correct size media into the input tray. |
|
|
A printer message other than READY appears | See Chapter 8. |
on the printer control panel. |
|
|
|
The correct printer driver is not installed in | Install the correct printer driver. |
your computer. |
|
|
|
The correct printer and port are not selected | Select the correct printer and port. |
on your computer. |
|
|
|
Your network is not configured properly for this | Use your network software to verify the |
printer. | printer’s network configuration, or consult with |
| your network administrator. |
|
|
The power source receptacle is not working | Connect the printer to a different power |
correctly. | receptacle. |
|
|
192 Solving problems with the printer | EN |
