Configuring the printer for the network at the printer control panel
| You might need to configure certain network parameters on the |
| printer. You can configure these parameters from the printer control |
| panel, the embedded Web server, or for most networks, from the |
| HP Web JetAdmin software (or the HP LaserJet Utility for Macintosh). |
| The utilities are provided on the printing software |
| comes with the printer. |
|
|
Note | The embedded Web server is a new printer feature from HP. For more |
| information about using the embedded Web server, see Appendix E. |
| For a complete list of supported networks and for instructions on |
| |
| configuring network parameters from software such as the HP Web |
| JetAdmin software, see the HP JetDirect Print Server Administrator’s |
| Guide. The guide comes with printers in which an HP JetDirect print |
| server is installed. |
| This section contains the following instructions for configuring |
| network parameters from the printer control panel: |
| ● configuring Novell NetWare frame type parameters |
| ● configuring TCP/IP parameters |
| ● configuring the Apple EtherNet phase parameters |
| ● disabling unused network protocols |
| Configuring Novell NetWare frame type |
| parameters |
| The HP JetDirect print server automatically selects a NetWare frame |
| type. Select a frame type manually only when the print server selects |
| an incorrect frame type. To identify the frame type chosen by the |
| HP JetDirect print server, print a configuration page from the printer |
| control panel. |
EN
Chapter 6 133