Lorex 8 channel Security NVR with real-Time 1080p recording manual

Record

•Under Frame Rate, select the recording frame rate.

•Under Max Bitrate, select the bitrate that will be used for video streaming in Kbps. It is recommended to select a value within the range shown under Max. Bitrate Range Recommended.

Select camera

Enter image quality settings for

motion recording

Enter image quality settings for continuous recording

6Configure the above settings under Mainstream (Motion) to set the parameters for motion recording.

7(Optional) Use the Copy button to copy the selected settings to other channels. A warning message may appear when copying settings to unconnected channels, but the NVR will copy settings to all connected channels.

8Click Apply to save changes. Right-click repeatedly to return to live viewing.

NOTE: If you get a "Bandwidth Exceeded" message, it is because you have set the combined bitrate or framerate for all your cameras higher than the NVR can process. It is recommended to set the bitrate and framerate to the following settings, based on the number of channels your NVR has:

Recommended Frame Rate and Bitrate per Number of Channels

Number of Channels	Frame Rate (frames per second)	Bitrate (Kbps)
4 channels	30	8192
8 channels	30	4096
16 channels	15	3200

Configuring the Pre-Record and Post-Record Times

The NVR supports pre-recording to record video from before events (such as motion or video loss) occur. The Pre-Record time determines how long the NVR will record before an event occurs.

The Post-Record time determines how long the NVR will record after an event occurs.

52