![](/images/new-backgrounds/1319064/319064215x1.webp)
Client Software for PC or Mac
•Manual Record : Click to start/stop manually recording the currently selected channel.
•Previous/Next :ClicktogotothepreviousornextcameraorpagewhenSequence mode is enabled.
•Sequence: Click to start/stop Sequence mode.
•Volume : Click to control volume.
7Connection Status: Shows the type of connection used.
•P2P
•RLY (relay) indicates that the video is streaming through a Lorex video server. While relay mode is activated, the system will disconnect after 10 minutes of inactivity. Relay mode is only used when a direct connection cannot be made between the NVR and computer.
8Alarm Panel Controls: ![](/images/new-backgrounds/1319064/319064215xi6.webp)
•
•Maximize Alarm Panel: Click to open the Alarm Panel in its own tab.
•Show/hide Alarm Panel
9Camera Display: Click to select a channel. Hold the mouse over the channel to access the Camera Toolbar. The camera toolbar contains the following options:
Camera Toolbar
•Capture : Click to take a screenshot from the currently selected camera.
•Manual Record : Click to start/stop manual recording of the currently selected camera.
• : Not supported.
•Digital Zoom : Click to enable digital zoom mode. The cursor will change to a
icon.
Then, click and drag on the camera picture to zoom in. Click again to zoom out.
•: Not supported.
•Camera Status : Show the camera status menu.
•Camera Settings : Open the Camera Settings menu. See “Camera Settings” on page 117.
•Stop Live Display : Click to stop streaming the selected camera.
•Quick Playback : Click to open Quick Playback mode.
•Mute audio : Click to mute/unmute audio from the selected camera.
10CPU and Network Status: Shows the level of CPU and network use on your computer.
90