![](/images/new-backgrounds/1319064/319064197x1.webp)
Maintenance
7Click on the firmware file and click Upgrade.
Click the firmware file
Click Upgrade
8Click Yes to confirm.
9Wait for the firmware upgrade to complete. Do not disconnect the power or remove the USB flash drive during the firmware upgrade. The NVR will reboot once the firmware upgrade is completed.
Default
Resetting the System to Factory Default Settings
Restoring to factory default settings reverts any setting changes you have made to their original settings. This does not affect the recordings saved on the NVR.
To reset to factory default settings:
1
2Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3Click Default then click OK. The system will reboot and then restart with the factory default settings.
Click Ok to reset the NVR to factory default settings
81