![](/images/new-backgrounds/1319064/319064131x1.webp)
HDD
To set S.M.A.R.T. settings:
1
2Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3Click HDD>HDD Detect.
4Under HDD, select the hard drive you would like to check.
NOTE: You can see the HDD No. of installed hard drives under the HDD>General
5Under
6Click next to S.M.A.R.T. to begin the S.M.A.R.T. test. Wait for the test to complete.
Select hard drive
Select S.M.A.R.T. test type
Click to start test
Checking the Hard Drive for Errors
The NVR can check the hard drive for errors or bad sectors.
To check the hard drive for errors:
1
2Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3Click HDD>HDD Detect>Bad Sector Detection.
4Under HDD, select the hard drive you would like to check.
NOTE: You can see the HDD numbers of installed hard drives under the HDD>General
48