![](/images/new-backgrounds/1319064/319064129x1.webp)
HDD
Advanced
Configuring Recording Group Settings
Use recording group settings if you want to specify which hard drive group your cameras will record to.
NOTE: You must have a second hard drive (not included) installed to use recording group settings.
To configure recording group settings:
1
2Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3Click HDD>Advanced.
4Under Record on HDD Group, select the hard drive group you would like to configure.
Select hard drive group
Select cameras to record to selected group
NOTE: To assign your hard drives to groups, see “Configuring Hard Drive Type or Group” on page 45.
5Check the cameras you would like to record to the selected hard drive group.
6Click Apply to save changes.
HDD Detect
NOTE: The options in the HDD Detect
Setting S.M.A.R.T. Settings and Running S.M.A.R.T. Checks on the Hard Drive
The device supports S.M.A.R.T. and Bad Sector Detection. S.M.A.R.T.
47