![](/images/new-backgrounds/1319064/319064289x1.webp)
Client Software for PC or Mac
5To change the Tampering Alarm sensitivity, adjust the Sensitivity slider.
6When Tampering Alarms are enabled, they are enabled 24/7 by default. If you want to configure times when they are enabled, click All Day Template.
Select or customize Tampering Alarm schedule for the selected camera
•In the Templates menu, times when Tampering Alarms are enabled are shown as light blue. Select one of the following:
•
•Weekday Template: Enable Tampering Alarms during working hours
•Select one of the standard templates or select Template01~08 and click Edit to create a custom template. Click and drag on each day to configure when motion detection is enabled. Click Save when finished making changes.
•Click Confirm to save changes to the schedule.
7Under Warning, check to enable the following warnings when the Tampering Alarm is triggered:
•Full Screen Monitoring: The selected channel will open in full screen.
•Audible Warning: System will beep.
•Notify Surveillance Center: An alert will be sent to the client software.
•Send Email: An alert email will be sent. Note that you must set up email alerts.
8Click Save to save changes.
Configuring Video Loss Alarms
Video Loss Alarms occur if the connection between the NVR and cameras is lost (for example, if the ethernet cable is disconnected).
To configure Video Loss alarms:
1Under Camera, select the camera you would like to configure.
2Click Video Loss.
127