![](/images/new-backgrounds/1319064/31906441x1.webp)
6LAN: Connect a CAT5 RJ45 Ethernet cable for local and remote connectivity.
7RS485: Not supported.
8Ground
9Power Port: Connect the included power cable.
10Power Switch: Turns the NVR on / off.
16-Channel
1 | 2 | 3 | 4 | 5 | 6 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 | 8 | 9 | 10 |
1Camera In: Connect IP cameras 1~8. Integrated PoE (Power Over Ethernet) ports provide power to cameras and video connection to NVR.
NOTE: To connect cameras 9~16, see “Connecting Cameras over the Local Network” on page 9.
2Video Out: Outputs the live display to a secondary monitor using a BNC cable (not included).
NOTE: You cannot see the mouse or system menus via BNC. Use a BNC to RCA adapter (not included) to connect the NVR to RCA inputs (i.e. for a TV connection).
3Audio IN/Audio OUT: Connect a microphone (not included) and 1 audio output device (e.g. speakers; not included).
4
5Power Port: Connect the included power cable.
6Power Switch: Turns the NVR on / off.
7USB Port: Connect a USB mouse (included) or USB flash drive (not included) for data backup or firmware updates.
8VGA Port: Connect a VGA monitor to view the system interface.
9HDMI Port: Connect an HDTV or monitor to view the system interface.
10LAN: Connect a CAT5 RJ45 Ethernet cable for local and remote connectivity.
11RS485/Alarm: Not supported.
3