Understanding built-in CD player error messages
When problems occur during CD play, an error message may appear on the display. If an error mes- sage appears on the display, refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your near- est Pioneer service center.
Display | Cause | Remedy |
ERROR- 00, 44 | All tracks are skip tracks. | Replace disc. |
|
|
|
ERROR- 11, 12, 17, 30 | Dirty disc. | Clean disc. |
|
|
|
ERROR- 11, 12, 17, 30 | Scratched disc. | Replace disc. |
|
|
|
ERROR- 12, 17 | Unrecorded disc. | Check the disc. |
|
|
|
ERROR- 10, 11, 12, 17, | Electrical or mechanical | Turn the car ignition ON and OFF, |
30, A0, B0 | problem. | or switch to a different source, then |
|
| switch back to the CD player. |
|
|
|
ERROR- 23 | The CD format cannot be | Replace disc. |
| played back. |
|
|
|
|
Can’t play | MP3 file cannot be played | Switch to other MP3 file. |
| back. |
|
|
|
|
HEAT | CD player overheated. | Turn off the CD player and wait |
|
| until the CD player cools down. |
|
|
|
No audio | Nothing has been recorded | Replace disc. |
| or the CD format cannot be |
|
| played back. |
|
|
|
|
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
74