Pioneer DEH-P9100R operation manual Audio menu, Using balance adjustment, Using loudness

Audio menu

The audio menu has the following functions:

3.Press 2 or 3 to adjust left/right speaker balance.

Each press of 2 or 3 moves the left/right speaker balance towards the left or the right.

•“BALANCE L25” – “BALANCE R25” is dis- played as the left/right speaker balance moves from left to right.

ENGLISH

Note:

•If you do not operate the function within about 30 seconds, the display is automatically returned. (When you select the 13-band graphic equalizer mode (EQ2) or the time alignment adjustment mode (T.AL2), the display is not returned automatically.)

•“T.AL2” is displayed only when you select “FL” or “FR” in the position selector mode (POSI).

•“SW2” is displayed only when the subwoofer output is on in the subwoofer output mode (SW1).

•“SLA” is not displayed when you select FM tuner as the source.

•“A.EQ” is displayed after the auto-equalizer curve has been set.

Using balance adjustment

You can select a fader/balance setting that pro- vides an ideal listening environment in all occu- pied seats.

1.Press AUDIO to select the fader/balance mode.

2.Press 5 or ∞ to adjust front/rear speaker balance.

Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear.

•“FADER F25” – “FADER R25” is displayed as the front/rear speaker balance moves from front to rear.

•“FADER FR00” is the proper setting when only two speakers are used.

Using loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1.Press AUDIO and then press LOUD to select the loudness mode.

2.Press LOUD to turn the loudness on.

“LOUDNESS ON” appears in the display.

• Press LOUD again to turn loudness off.

Using sound field control, octaver and BBER sound

SFC (sound field control) incorporates four pro- grams reproducing the typical sound field of a studio, club, concert hall or dome. This function makes it possible to reproduce the realistic sound fields of the four programs in your car. Octaver makes the bass sound louder. Playback very close to the original sound can be obtained by correction with a combination of phase compensation and high-range boost for the delay of the high-frequency components and the amplitude deviation occurring during playback. This function makes it possible to reproduce the dynamic sound field as if you are listening to a live performance.

Note:

•Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc.

ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

56