Pioneer DEH-P9100R Adjusting equalizer curves, Adjusting 13-band graphic equal- izer

Audio Adjustments

Recalling sound field programs

1.Press AUDIO and then press SFC to select the sound field control mode.

2.Press the corresponding button to select the desired sound field program.

Button	Effect
STUDIO	Studio
CLUB	Club
HALL	Concert hall
DOME	Dome
OCT	Octaver 1 and 2
BBE	BBE

•Press the same button again to cancel the selected sound field program.

Switching the octaver setting

You can switch the octaver setting. “OCTAVER2” has a stronger effect “OCTAVER1”.

1.Press AUDIO and SFC and then press OCT to select octaver.

2.Press 5 or ∞ to switch the octaver set- ting.

Each press of 5 or ∞ switches the octaver setting between 1 and 2.

Adjusting BBE sound level

For BBE sound processing technology, you can adjust the level of BBE.

1.Press AUDIO and SFC and then press BBE to select BBE.

2.Press 5 or ∞ to adjust the level of BBE.

Each press of 5 or ∞ increases or decreas- es the level of BBE.

•“+4” – “–4” is displayed as the level is increased or decreased.

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of “FLAT”, can be adjusted to a fine degree (nuance control).

1.Press AUDIO and then press EQ1 to select the graphic equalizer mode.

2.Press 5 or ∞ to adjust the equalizer curve.

Each press of 5 or ∞ increases or decreas- es the equalizer curve respectively.

•“+6” – “–6” is displayed as the equalizer curve is increased or decreased.

Note:

•The actual range of the adjustment differs depend- ing on which equalizer curve is selected.

•The equalizer curve with all frequencies set to 0 cannot be adjusted.

•You can use 2 and 3 to select the desired equaliz- er curve.

Adjusting 13-band graphic equal- izer

For “CUSTOM1” and “CUSTOM2” equalizer curves, you can adjust the level of each band.

•A separate “CUSTOM1” curve can be created for each source. (The built-in CD (MP3) and the multi-CD players are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than “CUSTOM2” is selected, the equalizer curve settings will be memorized in “CUS- TOM1”.

•A “CUSTOM2” curve can be created common to all sources. If you make adjustments when the “CUSTOM2” curve is selected, the “CUS- TOM2” curve will be updated.

57