Pioneer DEH-P9100R operation manual Selecting the recording range, Selecting the recording quality

Selecting the recording range

It is possible to select the recording range when recording from a CD.

1.In record standby, press FUNC to select the recording mode setting mode.

2.Press R.MODE to select the recording range.

Press R.MODE repeatedly to switch between the following recording ranges:

Built-in CD recording

Disc (disc recording) = (Continue (continu- ous recording)) = Track (one-track recording)

•Disc (disc recording) will record the disc you are listening to from the current track to the end of the disc.

•Continue (continuous recording) continues recording from the interrupted disc record- ing to the last track of the CD. (Even when a track other than the interrupted one is selected, recording will be performed from the interrupted track.)

•With Track (one-track recording), you can only record the track you are currently lis- tening to.

Note:

•When Disc (disc recording) has been interrupted, and record standby is performed again, Continue (continuous recording) will be performed, except in the following cases.

*In case of interruption because of an error.

*When the CD has been removed after the interrup- tion.

*In case of recording with “Track” after the inter- ruption.

*When the interruption has been caused by discon- necting the yellow lead (+ Battery) of this product.

•With Disc (disc recording), you cannot select and record only the track to be recorded. Unwanted tracks can be deleted from the music server after recording. (See page 37.)

Multi-CD Recording

All (all tracks recording) = Track (one-track recording)

•With Track (one-track recording), you can only record the track you are currently lis- tening to (not from the beginning of the track).

•On All (all tracks recording) you can record all tracks from the one you are listening to until you stop recording. (No rewind to the beginning of track or disc.)

Selecting the recording quality

When recording it is possible to select the sound quality. The larger the recording bit rate number, the higher the sound quality, although the total recording time will be shorter.

1.In record standby, press FUNC and then press RATE to select the recording bit rate mode.

2.Press RATE to select the recording bit rate.

Press RATE repeatedly to switch between the following setting:

132 kbps = 105 kbps

Note:

•The bit rate allows digital and analog recordings to be recorded in separate settings. (There is no need to change the setting when you wish to keep the bit rate previously set.)

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

30