The wash programme stops and a fault indicator light comeson.
What to do if ... Possible cause Remedy
The Check drain indica-
tor light is flashing.
The water outlet is
blocked.
Clean the fluff (drain) filter
and drain pump.
The drain hose has
been fixed too high.
The maximum drain height
is 1 m.
The Check inlet indicator
light is flashing.
The water inlet is
blocked –Open the stopcock.
–Start the programme
again.
One of the following indi-
cator lights is flashing:
–Soak/Pre-wash
–Main wash
–Rinses
–Rinse hold
There is a fault. –Press I-ON/0-OFF button
to release it.
–Turn the programme se-
lector to
Finish
.
–Press I-ON/0-OFF button
in.
–Re-start the programme.
–If the fault indicators oc-
cur again, contact the
Service Department.
Problem solving guide
45