ISelect any additional option re- quired | Miele 05 536 980 manual

How to wash correctly

ISelect any additional option re- quired.

A maximum of two additional options can be chosen, provided they are com- patible with the programme selected, (see the Programme survey in the Sec- tion on programmes). Only one option out of Soak, Pre-washand Short wash can be selected.

^Press the button for the Soak, Pre-washor Short wash additional options, until the indicator for the chosen option lights up.

^Press the button for the Water plus option, if required.

An additional option that has been se- lected can be de-selected by pressing the button.

JSelect a spin speed.

^Press the "Spin" button enough times until the indicator light for the re- quired final spin speed lights up.

In some programmes the maximum spin speed is limited. The machine will not allow a higher spin speed to be se- lected (see section on "programmes").

Memory-Function

If the last time a programme was run an additional option or different spin speed was selected,the machine will have stored this information in its memory.

The next time that programme is se- lected the machine offers the additional option and / or spin already stored in memory (see "Programmable func- tions").

KPress the START button.

The programme now starts.

15

Image 15

Miele 05 536 980 ISelect any additional option re- quired, JSelect a spin speed, Memory-Function, KPress the Start button

Contents

Premier Novo Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical Data Front view Guide to the machine Control panel Correct usage Technical safety Use Disposal of your old machine Accessories Washing environmentally and economically Before using for the first time Water hardness reminder dialFlushing out the machine Pre-treat the laundry How to wash correctlyBrief guide Before washing ASort the laundry To start a programme GPress in the I-ON/0-OFF button Maximum load weights are noted be- lowBPress the Door button CLoad the drum EOpen the stopcock FAdd detergent KPress the Start button ISelect any additional option re- quiredJSelect a spin speed Memory-Function At the end of a programme General exceptions Adding or removing washing after programme start Skipping a programme stage ProgrammeInterruption Alteration Too little has the following results Adding detergentIt is important to dispense the correct amount, because Water Hardness Fabric conditioners, texturisers, liquid starch Adding detergent Water softeners Starching separately Separate fabric conditioner or texturiser Programme selection Programmes Programmes COTTONS1 Minimum Delicates Woollens IRON1 Sequence Quick Wash Starch Spin Select the appropriate temperature ac Important other care symbols Tumble dryIroning Short Additional optionsSoak Pre-wash Switching off the additional options Water plusSpin Electronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched on Maximum water level Programmable functions Option Water plus system Selecting the Options Activating the i compartment Soak time Woollens ColdSelecting a different Soak time Gentle action Woollens 40 C ActivatingStoring the programmable function in memory Top-up rinse for Cottons Memory function Deactivating the programmable func- tionReactivating Cloth Cleaning and careCleaning the washing machine Extra cleaning Cleaning the detergent dispenser drawer Cleaning the fluff drain filter and pump After cleaning To clean the filter in the water inlet valve To clean the water inlet filters Programme does not start Problem solving guide Wash programme stops and a fault indicator light comes on Play FlashesCator light flashes Programme sequence dis General problems or an unsatisfactory wash result Tergent remain What to do if Possible cause Remedy Pump makesStrange noises Large residues of de There are white res What to do if Possible cause Remedy Grey, greasy partiCles cling to Washed laundry To check water pressure Opening the drum door in the event of a power failure Customer contact After sales serviceFuture updates PC Appliance guarantee Removing the transit fitting InstallationInstallation surface Installation Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feet Washer and Dryer stack Building under a worktop Connection to water supply Drain hose connection Connection to the drainage system Electrical connection U.K Electrical connection U.K Non-rewireable plugs BS Consumption data Technical Data Page Page Alteration rights reserved/3002