Programmable functions
Top-up rinse for Cottons
At the end of the main wash addi- tional water flows into the drum to cool the suds down.
Hot suds can damage plastic drainage pipes.
–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.
–where the drainage pipes do not comply with DIN 1986.
The washing machine is delivered with the
Before the
Selecting programming mode
AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.
BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:
C. . . switch the machine on with the
DLet go of all these buttons.
The indicator light Main wash flashes in the sequence display.
Selecting the programmable function
To select the
Activating
To activate
The Rinses light comes on in the se- quence display.
Storing in memory
To store the
The
Deactivating
If the
37
