Programmable functions

Programmable functions enable the user to introduce further features as required. They remain stored in memory until they are cancelled by the user.

Maximum water level

The water level for rinsing is automat- ically raised to the maximum level where rinse results are particularly important.

It is effective for the rinses in the follow- ing programmes:

-COTTONS

-MINIMUM IRON

-QUICK WASH

-MIXED WASH - Poly/Cottons

Before the "Maximum water level" pro- grammable function can be selected you must first select programming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.

BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:

C. . . switch the machine on with the I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in the sequence display.

Selecting the programmable function

To select the "Maximum water level" programmable function: turn the programme selector to -

MIXED WASH Poly/Cottons***.

Activating

To activate "Maximum water level" press the START button once.

The Rinses light comes on in the se- quence display.

Storing in memory

To store the "Maximum water level" pro- grammable function in the memory SWITCH the machine OFF with the I-ON/0-OFF button.

The "Maximum water level" programma- ble function is now stored in the ma- chine’s memory and is effective in the programmes described above until such time as you may wish to deacti- vate it.

Deactivating

To deactivate the use of a maximum water level in the rinses repeat the pro- cedure given above from point A as far as the *** shown above. Press the START button and the Rinses indicator light will go out. The function is now de- activated. Store in memory by pressing the I-ON/0-OFF button.

31

Page 31
Image 31
Miele 05 536 980 operating instructions Programmable functions, Maximum water level