Installation

Connection to the drainage system

The machine drains via a drain pump with a delivery head of 1 metre.

The drain hose is 1.5 m long. It must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull.

Drain hose connection:

1.Direct into a sink or basin: Please note the following

Hook the hose over the edge and se- cure.

Make sure that the water can drain away freely without hindrance. Other- wise there is a risk of water overflow- ing or of some of the drained water being sucked back into the machine.

2.Connected securely to a plastic drain pipe with a rubber nipple. There is no need to use a non-return valve.

3.Connected securely to a standpipe.

4. Connected securely to a floor gully.

If required, the drain hose can be ex- tended to a length of 5 m. The neces- sary parts can be purchased from the Miele Spare Parts Department, or your Miele dealer.

For a delivery head of more than 1 m (up to a maximum of 1.8 m) a second Duo-drain pump is available with the corresponding conversion kit from the Miele Spare Parts Department or your Miele dealer.

57

Page 57
Image 57
Miele 05 536 980 operating instructions Connection to the drainage system, Drain hose connection