Problem solving guide
With the help of the following notes minor faults in the performance of the appli- ance, some of which may result from incorrect operation, can be put right without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a suit- ably qualified person in accordance with local and national safety regulations. Unauthorised repairs could be dangerous.
The chart is divided into the following sections to help you:
–The programme does not start.
–The wash programme stops and a fault indicator light comes on.
–A fault indicator light comes on but the wash programme continues as normal.
–General problems or an unsatisfactory wash result.
The programme does not start.
What to do if ... | Possible cause | Remedy |
The | There is no power. | Check that |
ish indicator light is |
| – the door is properly closed. |
not on, or the START |
| – the mains plug is plugged in. |
indicator light is not |
| |
| – the fuse or circuit breaker has | |
flashing. |
| |
| not tripped. | |
|
| |
The programme does | The washing ma- | Prepare the machine as de- |
not start when Spin | chine has not been | scribed in "Before using for the |
has been selected. | prepared for using | first time". |
| for the first time. |
|
At the end of one | The programme se- | Turn the programme selector to |
programme you can- | lector has not been | the Finish postion and then to the |
not start the next | turned past the | programme you want to run. |
programme. | Finish postion. |
|
44
