Programmable functions
Memory function
If an additional option is selected for a programme, and / or the spin op- tion is altered, the machine stores these changes in memory at the start of a programme.
The memory function is active when the machine is first delivered but can be programmed to be switched off.
Deactivating
First select programming mode.
Selecting programming mode
AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.
BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:
C. . . switch the machine on with the
DLet go of all these buttons.
The indicator light Main wash flashes in the sequence display.
Deactivating the programmable func- tion
To
DELICATES 30°C ***.
As this programmable function is active when the machine is first delivered, the Rinses indicator light will come on in the sequence display as soon as the programme selector is turned to DELICATES 30°C.
To deactivate the "Memory" function press the START button and the light will go out. The memory function is now deactivated.
Storing in memory
To store this setting in memory SWITCH the machine OFF with the
Reactivating
To reactivate the memory function re- peat the procedure given above from point A as far as the *** shown above. Pressing the START button again will re- activate the "Memory" function and the Rinses indicator light will come on again. The function is now reactivated. Store in memory by pressing the
38
