Miele 05 536 980 Programme, Interruption, Alteration, Skipping a programme stage

How to wash correctly

Programme . . .

.. . interruption

^Press the I-ON/0-OFF button.

^To continue with the same programme press the I-ON/0-OFF button again.

. . . alteration

The machine will accept the following changes after the START button has been pressed,

–selection of a different temperature, extra selection or de-selection of the Water plus option can be carried out up to 6 minutes after start.

–the spin speed for final spin can be changed if the programme permits.

After start it is no longer possible to se- lect a different programme.

If a different programme or 6 minutes after start another temperature is se- lected the indicator light Anti-crease/Finishflashes. This does not affect the programme sequence. The indicator light goes out when the programme selector is set back to the programme or temperature previously chosen.

To select a different programme pro- ceed as follows:

^With the I-ON/0-OFF button switch off the appliance.

^Turn the programme selector to Fin- ish.

^Switch the machine on with the I-ON/0-OFF button.

^Select a new programme.

^Press the START button.

. . . Skipping a programme stage

^Turn the programme selector to Fin- ish.

As soon as the programme sequence light for the stage at which the programme should continue starts flashing:

^Turn the programme selector switch to the appropriate programme within 4 seconds.

When programme locking has been activated the programme cannot be changed nor can a programme stage be repeated or left out.

18