Gentle action, Woollens 40 C Activating | Miele 05 536 980 instruction

Programmable functions

Gentle action

For gentle washing of slightly soiled items. Drum action is reduced.

Gentle action can be used with the

COTTONS, MINIMUM IRON, QUICK WASCH, MIXED WASH - Poly/Cottons and Starch programmes.

If "Gentle action" has been pro- grammed, every wash cycle in these programmes is carried out with gentle action rhythm.

Before the "Gentle action" programma- ble function can be selected you must first select programming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to Finish.

BPress the additional option buttons Short and Water plus at the same time and hold pressed in and:

C. . . switch the machine on with the I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in the sequence display.

Selecting the programmable function

To select the "Gentle action" program- mable function turn the programme se- lector to -

WOOLLENS 40 °C ***.

Activating

To activate "Gentle action" press the START button once.

The Rinses light comes on in the se- quence display.

Storing the programmable function in memory

To store the "Gentle action" programma- ble function in the memory SWITCH the machine OFF with the I-ON/0-OFF but- ton.

The "Gentle action" programmable function is now stored in the machine’s memory.

Deactivating

If the "Gentle action" programmable function is no longer required it can be deactivated. To do so repeat the proce- dure given above from point A as far as the *** shown above. Press the START button and the Rinses indicator light will go out. The function is now de- activated. Store in memory by pressing the I-ON/0-OFF button.

36

Image 36

Miele 05 536 980 Gentle action, Woollens 40 C Activating, Storing the programmable function in memory

Contents

Premier Novo Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical Data Guide to the machine Front view Control panel Technical safety Correct usage Use Accessories Disposal of your old machine Washing environmentally and economically Before using for the first time Water hardness reminder dialFlushing out the machine How to wash correctly Brief guideBefore washing ASort the laundry Pre-treat the laundry Maximum load weights are noted be- low BPress the Door button CLoad the drumEOpen the stopcock FAdd detergent To start a programme GPress in the I-ON/0-OFF button ISelect any additional option re- quired JSelect a spin speedMemory-Function KPress the Start button At the end of a programme Adding or removing washing after programme start General exceptions Programme InterruptionAlteration Skipping a programme stage Adding detergent It is important to dispense the correct amount, becauseWater Hardness Too little has the following results Adding detergent Water softeners Fabric conditioners, texturisers, liquid starch Separate fabric conditioner or texturiser Starching separately Programmes Programme selection Programmes Sequence COTTONS1 Minimum Delicates Woollens IRON1 Quick Wash Starch Spin Select the appropriate temperature ac Important other care symbols Tumble dryIroning Additional options SoakPre-wash Short Switching off the additional options Water plusSpin Switching on programme locking Switching off programme locking earlyTo check if programme locking is switched on Electronic programme locking Programmable functions Maximum water level Water plus system Option Selecting the Options Activating the i compartment Soak time Woollens ColdSelecting a different Soak time Gentle action Woollens 40 C ActivatingStoring the programmable function in memory Top-up rinse for Cottons Memory function Deactivating the programmable func- tionReactivating Cleaning and care Cleaning the washing machineExtra cleaning Cloth Cleaning the detergent dispenser drawer Cleaning the fluff drain filter and pump After cleaning To clean the water inlet filters To clean the filter in the water inlet valve Problem solving guide Programme does not start Wash programme stops and a fault indicator light comes on Flashes Cator light flashesProgramme sequence dis Play General problems or an unsatisfactory wash result What to do if Possible cause Remedy Pump makes Strange noisesLarge residues of de Tergent remain What to do if Possible cause Remedy Grey, greasy parti Cles cling toWashed laundry There are white res Opening the drum door in the event of a power failure To check water pressure After sales service Future updates PCAppliance guarantee Customer contact Installation Installation surfaceInstallation Removing the transit fitting Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machine Building under a worktop Washer and Dryer stack Connection to water supply Connection to the drainage system Drain hose connection Electrical connection U.K Electrical connection U.K Non-rewireable plugs BS Consumption data Technical Data Page Page Alteration rights reserved/3002