Oki 6100E+ manual Print Configuration, Advanced Configuration Options

Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility

4. Click OK.

Print Configuration

The Print Configuration option is accessed by selecting Print Config from the File pull-down menu. Choose this option to print an OkiLAN 6100e+ configuration sheet. A configuration sheet will print to all output ports.

Status

The Status option is accessed by selecting Status from the File pull-down menu. This option displays the status and EtherTalk configuration of the selected OkiLAN 6100e+ printer.

Advanced Configuration Options

The following configuration options are advanced features of the OkiLAN 6100e+ utility. Most users will not need to access these features. Read the folloiwng descriptions carefully before utilizing these options.

Set Type

The Set Type option is accessed by selecting Type from the Configure pull-down menu. This option allows you to configure the AppleTalk Type. For some print spoolers to work properly, the AppleTalk Type must be changed. Refer to Appendix C of this section for more information.

The default AppleTalk Type is LaserWriter. For most printer drivers, this setting should not be changed. This includes the LaserWriter Drivers, HP LaserJet Drivers and other drivers.

Each EtherTalk printer port supports two AppleTalk Types:

•Type1 (mandatory) - The Type 1 default is LaserWriter. This option should not be changed unless the user wishes to use a print spooler without bypass or the user does not want the printer to respond to any of the LaserWriter drivers.

VII - 6 OKI OkiLAN 6100e+ User’s Guide