
Section 4 - Chapter 4 - OkiNet for TCP/IP
Configuring TCP/IP Options
To configure options specific to the TCP/IP protocol, select the TCP/IP tab. The following screen will display:
Fill in the following information:
IP Address Resolution
•Set Permanent - Select this option to make the IP address permanent. If the OkiLAN 6100e+ has been configured to remember its IP address, it does not need to determine its address each time it is powered on.
Enter the IP address for the OkiLAN 6100e+. The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255.
CAUTION: If you select an invalid IP address, you may not be able to access the OkiLAN 6100e+.
•Use Network Protocol - Select this option to use RARP, BOOTP or DHCP to determine the IP address at power up. Specify which protocol(s) to use.
TCP/IP
OKI OkiLAN 6100e+ User’s Guide | IV - 25 |