Section 4 - Appendix A - Troubleshooting
OkiNet for TCP/IP - Winsock Errors
•If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the hosts file in the Windows directory (check the documentation for your Windows TCP/IP stack).
•If you have difficulty seeing a particular OkiLAN 6100e+, try moving the device onto the same subnet as the computer running the utility.
•If OkiNet for TCP/IP gives you the Winsock error: Could not bind to socket, use the Special Options dialog under the File menu to change the Discovery UDP Port to a different port number.
Hardware Error Messages
ST: Cable not connected
•Check the cable connection to the OkiLAN 6100e+.
•Move the OkiLAN 6100e+ to another known working node.
If you find the cable is connected and you are still receiving this message or any other “ST:” error message, power cycle the OkiLAN 6100e+. If the error continues, call Okidata Customer Support at
System CRC Failed
The OkiLAN 6100e+ has failed.
•Power cycle the OkiLAN 6100e+ once. If the error continues, call Okidata Customer Support at
IV - 52 | OKI OkiLAN 6100e+ User’s Guide |
