Section 8 - Chapter 2 - OkiLAN 6100e Setup for Windows NT 3.51
Chapter 2
OkiLAN 6100e+ Set Up for Windows NT 3.51
Overview
This section contains information on setting up your OkiLAN 6100e+ for a Windows NT 3.51 environment. Print options for Windows NT 3.51 include:
•OkiLAN 6100e+ Connect for IP
•OkiLAN 6100e+ Connect for DLC
•LPR
OkiLAN 6100e+ Connect for IP
OkiLAN 6100e+ Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6100e+ Connect allows you to print to print servers that are using Dynamic IP addresses (DHCP). It will also notify you immediately in the event of a printer error (e.g. Paper out). Print jobs printed through OkiLAN 6100e+ Connect are sent directly to the OkiLAN 6100e+ print server and not routed through a network server, resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6100e+ Connect for TCP/IP for your Windows NT 3.51 operating system, your computer must be configured to run TCP/IP. The OkiLAN 6100e+ print server must also be configured to run TCP/IP.
Installation
To install OkiLAN 6100e+ Connect for TCP/IP, follow the instructions below:
1. Install the OkiLAN 6100e+ Connect for TCP/IP
VIII - 10 OKI OkiLAN 6100e+ User’s Guide
