Section 2 - Chapter 4 - HP Web JetAdmin Support
Chapter 4
HP Web JetAdmin Support
Overview
This section contains instructions and information on how to configure, install, and obtain diagnostic information from your OkiLAN 6100e+ using the
Software Requirements
• Web JetAdmin 1.x, 2.x, 3.x, or 4.x
Note: For more information on installing and using HP Web JetAdmin, refer to the HP Web JetAdmin documentation.
Configuring the OkiLAN 6100e+ Using Web JetAdmin
1.From the main Web JetAdmin page, select the OkiLAN 6100e+ port you wish to configure.
2.On the Properties page, click the Config button.
3.Make any necessary changes to the options listed and click the corresponding Apply button.
Installing a Windows NT Printer for the OkiLAN 6100e+
1.From the main Web JetAdmin page, select the OkiLAN 6100e+ port you wish to install.
2.On the Properties page, click the Install Printer button.
3.In the Specify the device address… field, enter the print server IP address, followed by a comma and then the output port number. For example, to install a printer for output port 2 of an OkiLAN 6100e+ with an IP address of 10.10.10.2, enter “10.10.10.2,2”.
Advanced Management
OKI OkiLAN 6100e+ User’s Guide | II - 9 |
