Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for Windows 95/98
Chapter 3
OkiLAN 6100e+ Set Up for Windows 95/98
Overview
This section contains instruction and information on how to set up your OkiLAN 6100e+ for a Windows 95/ 98 environment. Print options for Windows 95/98 include:
•OkiLAN 6100e+ Connect for TCP/IP
•OkiLAN 6100e+ Connect for DLC
•OkiLAN 6100e+ Connect for IPX/SPX
OkiLAN 6100e+ Connect for TCP/IP
OkiLAN 6100e+ Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. With OkiLAN 6100e+ Connect, you can even print to print servers using Dynamic IP addresses (DHCP). Print jobs printed through OkiLAN 6100e+ Connect are sent directly to the OkiLAN 6100e+ print server and not routed through the network server, resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6100e+ Connect for TCP/IP, your operating system must be Windows 95/98 and your computer must be configured to run TCP/IP. The OkiLAN 6100e+ print server must also be configured to run TCP/IP.
Installation
To install OkiLAN 6100e+ Connect for TCP/IP:
1.Install the OkiLAN 6100e+ Connect for
2.When installation is complete, click on Start, Settings and then Printers.
VIII - 14 OKI OkiLAN 6100e+ User’s Guide
