Section 8 - Chapter 1 - OkiLAN 6100e Setup for Windows NT 4.0
Chapter 1
OkiLAN 6100e+ Set Up for
Windows NT 4.0/2000
Overview
This section contains instruction and information on how to set up your OkiLAN 6100e+ for a Windows NT 4.0/2000 environment. Print options for Windows NT 4.0/2000 include:
•OkiLAN 6100e+ Connect for IP
•OkiLAN 6100e+ Connect for DLC
•LPR
OkiLAN 6100e+ Connect for IP
OkiLAN 6100e+ Connect for TCP/IP is a full featured utility that allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6100e+ Connect has advantages over other TCP/IP printing options. It allows you to print to print servers that are using Dynamic IP addresses (DHCP). It will also notify you immediately in the event of a printer error (e.g. Paper out). Print jobs printed through OkiLAN 6100e+ Connect are sent directly to the OkiLAN 6100e+ print server and not routed through a network server, resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6100e+ Connect for TCP/IP for your Windows NT 4.0/2000 operating system, your computer must be configured to run TCP/IP. The OkiLAN 6100e+ print server must also be configured to run TCP/IP.
Windows Printing
OKI OkiLAN 6100e+ User’s Guide | VIII - 3 |
