Oki 6100E+ manual Click OK

Section 8 - Chapter 3 - OkiLAN 6100e+ Setup for Windows 95/98

3.Select the Windows printer from which you would like to print with OkiLAN 6100e+ Connect, then select Properties from the File menu.

4.Add an OkiLAN 6100e+ Connect port. This may be done by selecting Add Port under the Details tab.

5.In the Add Port window, select the radio button labeled Other and then select OKI OkiLAN 6100e+ Connect IP Monitor as the type of port to add.

6.Click OK.

You will enter into the Add OkiLAN 6100e+ Connect Port screen where there will be a list of all OkiLAN 6100e+ print servers available on the local subnet.

7.If the port you wish to add is listed in the Ports available on local subnet window, select the port name and click the Add button.

If the port you wish to use is not listed, click the Locate non-local device button and enter the Static IP Address used for the print server. Click the Add button.

Note: The OkiLAN 6100e+ Connect discovery feature will relocate a print server by the port name, even if the IP address changes. This feature is enabled on the local subnet only. Non-local print servers will not be re- discovered if the IP address changes.

Windows Printing

OKI OkiLAN 6100e+ User’s Guide VIII - 15