Section 3 - Chapter 3 - OkiNet for NDS

Configuring the OkiLAN 6100e+ Using OkiNet for NDS

The following steps outline how to configure an OkiLAN 6100e+.

1.From the NWAdmin screen, select (double-click) the OkiLAN 6100e+ you wish to configure.

2.Set the appropriate configuration by choosing the applicable detail pages.

The following settings are configurable:

Identification

Network Protocols

Assignments

Port Configuration

Network Configuration

Status

For specific information about these detail pages, select the HELP button.

Adding or Removing the OKI Print Server Class

The OKI print server class is added to Novell’s NetWare Administrator by the installation utility. This class must exist in order to create an OKI Print Server object for use in printing to the device.

Removing the OKI Print Server Class

1.Run Novell’s NetWare Administrator.

2.Verify all OKI print server objects have been removed from the directory tree.

3.From the Tools menu, choose Remove OKI Printing Device Class. The OKI print server class will no longer show up in the Create New Object dialog. If the Remove OKI Printing Device Class option is grayed, the class has already been removed. If the option does not exist, OkiNet for NDS is not installed.

NetWare

OKI OkiLAN 6100e+ User’s Guide

III - 31

Page 77
Image 77
Oki 6100E+ manual Configuring the OkiLAN 6100e+ Using OkiNet for NDS, Adding or Removing the OKI Print Server Class