Section 3 - Chapter 1 - Introduction

Chapter 1: Introduction

Overview

This section contains instructions and information on how to configure your OkiLAN 6100e+ in the NetWare environment.

There are two environments in which to configure the OkiLAN 6100e+:

Bindery (NetWare 3.x)

NetWare Directory Services (NDS)-for NetWare versions 4.1 and later.

Before You Start

You should be familiar with network administration as well as the physical setup and operation of your network.

Write down the serial number and the Ethernet or Token-Ring address of your OkiLAN 6100e+. You will find these numbers on the OkiLAN 6100e+ enclosure.

Install the OkiLAN 6100e+ hardware and connect the cabling-see Section I. Instructions for hardware installation are found in Section I of this manual.

Install the OkiNet Utility for NetWare-see Section I.

III - 4

OKI OkiLAN 6100e+ User’s Guide

Page 50
Image 50
Oki 6100E+ manual Introduction, Before You Start