Section I - Chapter 1 - Installing the OkiLAN 6100e+
7a. OKIPAGE 16n, 18, 20, 20DX and 24DX: Remove and save the two screws on the left of the metal plate covering the internal board, then pull the plate out about an inch and lift it out.
Pry off the plastic cutout on the back of the printer.
7b. OKICOLOR 8: Remove and save the three screws on the top of the metal plate covering the internal board, then pull the plate out about an inch and lift it out.
Unfasten the screw holding the metal blank onto the back of the printer and remove it.
Hardware Installation
OKI OkiLAN 6100e+ User’s Guide | I - 5 |
