Section 3 - Chapter 3 - OkiNet for NDS

6.Select Assign.

7.Select or create a NetWare Printer object from the Printer/Queue Assignments dialog.

8.Select or create a NetWare Print Queue object from the Printer/Queue Assignments dialog.

9.Select OK to save your printer and queue selections.

Note: To load balance print queue jobs, repeat steps 5 through 9 for another port. Create a new printer object for the OkiLAN 6100e+ port and then select the same print queue object. This will allow multiple printers to service a single print queue.

10.From the Assignments page, select OK to save changes. If you have selected PServer mode, you have completed all necessary steps. Continue to Configuring the OkiLAN 6100e+ Using OkiNet for NDS.

11.Select or create a NetWare Print Server object from the Assignments page.

12.Select a port to configure from the Assignments page, then select Assign.

13.Select or create a NetWare Printer object from the Printer/Queue Assignments dialog.

14.Select or create a NetWare Print Queue object from the Printer/Queue Assignments dialog.

15.Select OK to save your printer and queue selections.

16.From the Assignments page, select OK to save changes.

17.From the file server, restart the PSERVER.nlm.

III - 30

OKI OkiLAN 6100e+ User’s Guide

Page 76
Image 76
Oki 6100E+ manual OkiNet for NDS