Section 8 - Chapter 1 - OkiLAN 6100e Setup for Windows NT 4.0
Notify When Printed
This feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy.
Description
An optional field where you may list the location or other useful information about the printer port.
Using the Windows NT 4.0 LPR Print Monitor
A Microsoft LPR print monitor is shipped with Windows NT 4.0. This print monitor is not included in the default Windows NT installation; therefore, it will need to be installed. In order to set up an LPR printer in Windows NT 4.0, the system must have an IP address, the print server must have an IP address, and Microsoft TCP/IP printing must be installed.
System Requirements
•Administrator privileges
•Windows NT installation disks or CD
Install TCP/IP on NT Server
If Microsoft TCP/IP has not been installed on the Windows NT print server, follow the steps below:
1.Open the Windows NT Control Panel.
2.
3.Select the Protocols tab.
4.Select TCP/IP Protocol and click the Properties button.
5.Assign the server an IP address (for LANS without Internet access, it is suggested to use 10.10.10.1). Click OK.
Windows Printing
OKI OkiLAN 6100e+ User’s Guide | VIII - 7 |
