Section 4 - Chapter 4 - OkiNet for TCP/IP

Enabling/Disabling Protocols

To enable or disable protocols on the OkiLAN 6100e+, select the Protocols tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6100e+ will no longer communicate using that protocol.

SNMP Trap Configuration

The SNMP Trap option allows configuration of traps. Traps are unsolicited information concerning the OkiLAN 6100e+. Traps can be sent to an SNMP manager or be broadcast to all hosts on the local segment.

To configure SNMP traps, select the SNMP Traps tab.

Note: SNMP options need to be configured only if you are managing an OkiLAN 6100e+ or getting system information using SNMP.

Protocol

Select the protocol for which you wish to configure trap information.

IV - 32

OKI OkiLAN 6100e+ User’s Guide

Page 110
Image 110
Oki 6100E+ manual Enabling/Disabling Protocols, Snmp Trap Configuration