Handset accessories
Installing the headset
To use the optional wired headset with your DECT 4027, 4070, or 4075 Handset, install it as shown in the following figure.
Note: (4075 only) The headset jack is covered by a protective plug. Remove it before installing the headset.
Figure 21: Installing the headset
Headset |
connector |
Headset |
Removing and installing the battery pack (4075 only)
Use the following steps to remove and install the battery pack and cover:
1.Place the handset face down on a flat surface.
2.Unlock the battery cover as shown in Figure 22.
3.Remove the battery compartment cover.
218
