Nortel Networks 4075 manual Answer mode configuration

Telephone settings

2.Press the Up or Down key to highlight the Units option.

Units

Select

3.Press the Select soft key.

4.Press the Up or Down key to highlight the Call time option or the Message count option.

Call time

Message count

Reset

Yes

Attention: The message count option is available on the DECT 4070 and 4075 Handsets only.

The Call time and Message count options reflects statistics for outgoing calls and messages.

5.Optionally, press the Reset soft key to clear stored statistics.

6.Press the Yes soft key to confirm the changes.

7.Press the Clr key one or more times to return to the idle display.

Answer mode configuration

You can configure your handset to handle incoming calls in any of the following ways:

•Any key answer mode—you can answer with any key

•Autoanswer mode—the handset goes off-hook automatically

•Normal answer mode—answer using the OK or Call key

This section describes the following tasks:

•“Activating Any key answer mode” (page 190)

•“Activating Autoanswer mode” (page 190)

•“Activating Normal answer mode” (page 191)

189