Nortel Networks 4075 manual Installing the charger, Installing the battery pack

Getting started

Figure 2: Installing the battery pack

Handset

Battery pack

Installing the charger

To install the charger, perform the following steps:

1.Place the charger on a flat surface.

2.Connect the AC adapter cable to the terminal on the bottom of the charger.

3.Connect the adapter to an electrical outlet.

4.Place the handset on the charger as shown in Figure 3.

Note: (4075 only) The 4075 Handset charger has a slot that you can use to charge a battery pack without having the battery pack installed in the phone. See “Charging the battery pack (4075 only)” (page 220) for more details.

20