On
Off
Select
Telephone settings
4.Press the Up or Down key to select On or Off.
5.Press the Select soft key to apply the changes.
6.Press the Clr key one or more times to return to the idle display.
Configuring Cadence Mode
A cadence defines the duration of the on and off phases of a ringing cycle. You can use the Tones and Cadences feature on the Communication Server 1000 (CS 1000) system to configure ring cadences to identify different types of incoming calls. For more information about Tones and Cadences on CS 1000, see Features and Services Fundamentals
Attention: Cadence Mode is applicable to traditional DECT systems only (based on DMC cards). If you enable or disable Cadence Mode for a SIP DECT solution, there is no impact.
To cause your DECT handset to use the ring cadences configured on your CS 1000 system, you must activate Cadence Mode on your DECT handset. This allows the PBX system to control the on and off phases of the ringing cycles on the handset. If Cadence Mode is disabled on your handset, the handset continuously plays its ringing melody on any incoming call, irrespective of the Tones and Cadences configuration on your CS 1000 system.
To activate Cadence Mode on your handset, perform the following steps:
1.Open the Sounds and alerts menu using the steps in “Accessing the Sounds and alerts menu” (page 167).
179
